MÁY HÀN PROMIG 400-4S DUO.DV Hãng: GYS – Pháp 
Three phase «Synergic» 350 Amp MIG welder with 4 drive rollers. Ideal for maintenance and industrial production work.
Increase productivity – With two individual wire feeders it enables two different wire types/sizes are fitted at the same time thus avoiding time
consuming wire and gas bottle changes.
SIMPLIFY YOUR WORK
2 gas controls : Two solenoid valves enable different gas types to be selected just by
pressing the trigger e.g Argon for aluminium used with the main machine and Argon/CO2
for steel on the separate wire feed unit
2 MODES : SYNERGIC OR MANUAL
GYS experience integrated in more than 1000 parameters managed by microprocessor.
Synergic mode : Optimum results without adjusting the wire speed :
• Select wire type
• Select wire size
• Select the power (refer to table on the front of the machine)
PROMIG 400-4S DUO will ensure :
• Optimum wire speed
• Pre-gas / post-gas
• Burnback
PROMIG 400-4S DUO will display :
• Wire speed
• Voltage
• Current
For WPS in the field of application of a WPQR.
WPS : Welding Procedure Specification
WPQR : Welding Procedure Qualification Record
Manual mode : Manual adjustement option of the wire speed and powe
| Input power | 3 Ph x 400V 50/60Hz |
| Input power | 3 Ph x 230 V 50/60Hz |
| Fuse | 16A |
| Fuse | 25A |
| Welding current range: min – max | 40 – 350 A |
| Gas | 0,8 – 1.2 |
| Coil diameter | 200 – 300 mm |
| welding wire | 1.0 – 1.2 mm |
| Dow load cycle (40°C) 60%. | 270A |
| Dow load cycle (I2 max) 35% | 350A |
| Cyele does not load: | 17V – 37V |
| Rated Power | 17 KVA |
| Dimensions | 50x90x88 cm |
| Weight | 102 kg |
Manh –
Sản phẩm tốt hơn so với mong đợi, đơn vị vận chuyển nhanh chóng, chăm sóc khách hàng thân thiện