This single phase welding machine is designed to weld steel with a NO GAS process up to
110A. Portable, easy to set up thanks to the SMART board, it is designed for maintenance.
EXAMPLE OF APPLICATIONS
It is designed for repairing,maintening and assemblingsteel.
1 PROCESS
NO GAS for welding outside -Cored wire 0.9mm
ELECTRICAL CONSUMPTION
Low consumption – 16A – 230V
EASY AND FAST SETTING
With the Novomig no complicated adjustement.
Thanks to the Novo Controller board it is
easy to adjust the voltage (2 positions) andthe wire feeding speed.
Ideal setting indicated, just select the thicknessof the metal sheet to weld.
FEATURES
No gas welding process allows :
• To weld with cored wire.
• To work outside without being disturbed by the wind.
• To easily carry the machine thanks to the No gas process (no gas bottle). Ideal for working in difficult access.
PORTABLE
• It only weighs 14 kg.
• No gas bottle to carry.
WIRE REEL
It is designed to work with ø100 mm wire reel
ACCESSORIES
Delivered with a 1.6m earth clamp and a 2m fixed torch
Input power | 1 Ph x 230V 50/60Hz |
Fuse | 13A |
Welding current range: MIG | 40 – 100A |
No gas | 0,9 |
Coil diameter | 100 mm |
sometime | 0,9 |
No gas | 0,9 |
Dow load cycle (40°C) 60%. | 110A |
Dow load cycle (I2 max) | 85A |
Cyele does not load | 25.5>30V |
Rated Power | 3 KVA |
Dimensions | 16x37x36 cm |
Weight | 14 kg |