MÁY HÀN MIG / MAG NEOPULSE 500 G Hãng: GYS – Pháp

Digital technology, the NEOPULSE 500 G is a pulsed MIG/MAG welding power source with a separate wire feeder.
Ultra high performance and designed for the highest performance level using the latest technology, it features +100
synergic curves and exceptional arc quality/performances. Intuitive and highly functional, its digital interface allows
you to change welding parameters with ease. Equipped with its NEOFEED-4W reel (optional), this welding power source
provides productivity and quality of unmatched welding on all types of alloys.

MULTI-PROCESS WELDING

MIG/MAG :
– steel and stainless steel wire: Ø 0.6 to 1.6 mm
– aluminium wire: Ø 0.8 to 1.6 mm
– CuSi and CuAl wire: Ø 0.8 to 1.2 mm
MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 6 mm)
TIG DC lift / Pulse

SMART

SYNERGIC mode : Select the material/gas type and wire diameter, now the NEOPULSE
automatically determines the optimal welding conditions and allows you to adjust the settings
(wire feed speed, voltage, current, arc length)

ACCURATE

– Calibration of welding accessories, to adjust the displayed voltage measurement and the energy calculation.
– Energy, display and energy calculation after welding according to EN1011-1, ISO / TR 18491 and QW-409.
– Portability : load / save as, JOBS from a USB key as well as the machine configuration.
–Traceability : trace / record all welding steps, weld by weld, during industrial manufacturing according to EN ISO 3834.

OPTIMISED MIG/MAG SETTINGS

– Welding processes : Manual, Dynamic STD, Pulsed, Modul Arc (variation of hot / cold current)
– TACK modes : SPOT and DELAY.
– Trigger management : 2T and 4T.
-Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope,Downslope, Crater Filler, Postgas, e

MAXIMUM PRODUCTIVITY
Intended for heavy and demanding industrial applications:

– 4 microprocessors increase the speed of communication and optimize the efficiency of the product.
– High productivity thanks to its high duty cycle (470A @ 60%).
– Connectable via a SAM control interface for use on robot/automaton (optional).
– Higher resistance and robustness of the electronics.
– Powerful electronically controlled wire feed motor (100 W) with 4 active drive rolls.
– High arc voltage for easier ignition and exceptional arc dynamic.

ADVANCED INTUITIVITY

– New user friendly interface focused on welders’ navigation habits.
– Complete update of the machine and synergies by USB key.
– Cooling unit (ref. 032750) and trolley (ref. 037328) optional.
– Storage of 500 welding programs (can be saved on USB stick).
– Displays current/voltage during and after welding (WPS/PQR).
– Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).
– Internal lighting of the motorized roll and wire reel.
– Viewing window on trapdoor to check the consumption of the filler wire.
– Intelligent ventilation management to reduce power consumption, dust extraction and
substation noise.

ROBUST AND MOBILE

– Reinforced metal case & non slip rubber pads.
– IP 23 protection rate.
– Interconnection cables (air or water cooled) up to 20m (optional).
– Remote settings of the wire feeder using the 2 optional remote controls (digital or analog).
– 4 rings/brackets for lifting/positioning