MÁY HÀN MIG / MAG NEOPULSE 400 G Hãng: GYS – Pháp 
Digital technology, the NEOPULSE 400 G is a pulsed MIG/MAG welding power source with a separate wire feeder.
Ultra high performance and designed for the highest performance level using the latest technology, it features +100
synergic curves and exceptional arc quality/performances. Intuitive and highly functional, its digital interface allows
you to change welding parameters with ease. Equipped with its NEOFEED-4W reel (optional), this welding power source
provides productivity and quality of unmatched welding on all types of alloys.
MULTI-PROCESS WELDING
MIG/MAG :
– steel and stainless steel wire: Ø 0.6 to 1.6 mm
– aluminium wire: Ø 0.8 to 1.6 mm
– CuSi and CuAl wire: Ø 0.8 to 1.2 mm
MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 6 mm)
TIG DC Lift / Pulse.
SMART
SYNERGIC mode : Select the material/gas type and wire diameter, now the NEOPULSE
automatically determines the optimal welding conditions and allows you to adjust the settings
(wire feed speed, voltage, current, arc length).
ACCURATE
– Calibration of welding accessories, to adjust the displayed voltage measurement and the energy calculation.
– Energy, display and energy calculation after welding according to EN1011-1, ISO / TR 18491 and QW-409.
– Portability : load / save as, JOBS from a USB key as well as the machine configuration.
– Traceability : trace / record all welding steps, weld by weld, during industrial manufacturing according to EN ISO 3834.
OPTIMISED MIG/MAG SETTINGS
Welding processes : Manual, Dynamic STD, Pulsed, Modul Arc (variation of hot / cold current)
TACK modes : SPOT and DELAY.
Trigger management : 2T and 4T.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Postgas, etc.
MAXIMUM PRODUCTIVITY
Intended for heavy and demanding industrial applications:
– 4 microprocessors increase the speed of communication and optimize the efficiency of the product.
– High productivity thanks to its high duty cycle (400A @ 60%).
– Connectable via a SAM control interface for use on robot/automaton (optional).
– Higher resistance and robustness of the electronics.
– Powerful electronically controlled wire feed motor (100 W) with 4 active drive rolls.
– High arc voltage for easier ignition and exceptional arc dynamic.
ADVANCED INTUITIVITY
New user friendly interface focused on welders’ navigation habits.
– Complete update of the machine and synergies by USB key.
– Cooling unit (ref. 032750) and trolley (ref. 037328) optional.
– Storage of 500 welding programs (can be saved on USB stick).
– Displays current/voltage during and after welding (WPS/PQR).
– Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).
– Internal lighting of the motorized roll and wire reel.
– Viewing window on trapdoor to check the consumption of the filler wire.
– Intelligent ventilation management to reduce power consumption, dust extraction and
substation noise.
ROBUST AND MOBILE
– Reinforced metal case & non slip rubber pads.
– IP 23 protection rate.
– Interconnection cables (air or water cooled) up to 20m (optional).
– Remote settings of the wire feeder using the 2 optional remote controls (digital or analog).
– 4 rings/brackets for lifting/positioning
| NEOPULSE 400 G | |
| Power supply voltage | 3 x 400 V +/- 15% |
| Mains protection (delayed) | 32A |
| Current range MIG-MAG / MMA / TIG | 10 – 200A |
| Dow load cycle (40°C) 60%. | 400A |
| Dow load cycle (I2 max) 100% | 360A |
| Current range MIG-MAG / MMA / TIG | 10 – 400 A |
| No load voltage | 85 V |
| Voltage on charge: MIG-MAG | 14.5 – 34 V |
| Voltage on charge: MMA | 20.4 – 36 V |
| Voltage on charge: TIG | 10.4 – 26 V |
| Max. productivity % | 91 % |
| No-load consumption: MIG-MAG TIG | 37 W |
| No-load consumption: MMA | 157 W |
| Protection class | IP23 |
| Dimensions | 680 x 300 x 420 mm |
| Weight | 28.5 kg |
| NEOFEED 4W | |
| Power supply voltage | U11 = 48V – 2A |
| Power supply voltage | U12 = 24V – 1A |
| Mains protection (delayed) | 32A |
| Dow load cycle (40°C) 60%. | 500A |
| Dow load cycle (I2 max) 100% | 460A |
| Wire speed | 1 – 22 m/min |
| Wire feeder motor | 4 motor reels |
| Roller diameter | 37 mm (Type F) |
| Wires ø Stainless stee | 0.6 – 1.6 mm |
| Wires Ø Coated wire | 0.9 – 2.4 mm |
| Wires ø Aluminium | 0.8 – 1.6 mm |
| Wires ø CuSi / CuAl | 0.8 – 1.2 mm |
| Wire reels weight / min. ø | 5 kg – 200 mm |
| Wire reels weight / max. ø | 18 kg – 300 mm |
| Protection class | IP23 |
| Dimensions | 630 x 440 x 290 mm |
| Weight | 19 kg |
