MÁY HÀN MIG / MAG NEOPULSE 320 C Hãng: GYS – Pháp

The NEOPULSE 320 C is a digital 3 phase MIG/MAG pulse welding machine. Designed for the highest performance level
using the latest technology, it features numerous synergic curves and exceptional arc quality/performance. User friendly
and highly practical, the digital interface is designed for quick and easy adjustments of the welding parameters. Equipped
with a precise 4-Roll drive system, this powersource provides unparalleled productivity and welding quality on all types
of materials.

MULTI-PROCESS WELDING

MIG/MAG :
– steel wire: Ø 0.6 to 1.2 mm
– stainless steel wire: Ø 0.8 to 1.2 mm
– aluminium wire: Ø 0.8 to 1.2 mm
– CuSi and CuAl wire: Ø 0.8 to 1.2 mm
MMA DC / Pulse: basic, rutile and cellulosic electrodes (up to Ø 5 mm).
TIG DC Lift / PULSE

SMART

SYNERGIC mode: After selecting material/gas combination and the wire diameter.
NEOPULSE automatically works out the optimal welding conditions while still allowing you to
adjust the settings (wire feed rate, voltage, current, arc length)

ACCURATE

Calibration of the welding cables and motor speed, in order to adjust the voltage displayed and refine the energy calculation.
Energy, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409.
Portability: load/save user JOBS and machine settings using a USB stick.
Traceability: track / record all welding steps, weld by weld, during industrial manufacturing in line with standard EN ISO 3834.

OPTIMISED MIG/MAG SETTINGS
Welding processes: Manual, Dynamic STD, Pulsed, Arc Module (variation of hot / cold current)
TACK modes: SPOT and DELAY.
Trigger options supported: 2T and 4T.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill,Postgas, etc.

MAXIMUM PRODUCTIVITY
Intended for heavy and demanding industrial applications:
4 microprocessors increase the speed of communication and optimize the efficiency of the powersource.
High productivity thanks to high duty cycle (300 A @ 60%).
Compatible wire reels: Ø 200 / 300 mm.
Connectable via a SAM control interface for use on robot/automaton (optional).
Robust design to withstand shock and vibration
Powerful electronically controlled wire feed motor (100 W) with 4 active drive rolls.
Very high arc voltage for easier ignition and exceptional arc dynamic.

EASY TO USE
New user friendly interface focused on welders’ navigation habits.
Update of the machine and synergies using a USB key.
Cooling unit (ref. 013537) and trolley (ref. 037328) optional.
Storage of 500 welding programs (can be saved on USB stick).
Displays current/voltage during and after welding (WPS/PQR).
Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).
Internal lighting of the wire feed motor and wire reel.
Viewing window on wire door to check the level of wire.
Intelligent ventilation management to reduce power consumption, dust intake and noise.
Compatible torch Push-Pull (24 V / 42 V)

ROBUST AND MOBILE

Reinforced metal case & non slip rubber pads.
IP23 case.
Separate NEOFEED-4W* dispenser with air or water connection cables up to 20m (optional)
Remote adjustment of the generator using 2 optional remote controls (digital* or analog).

3 levels of interface for the user:
– Easy: simplified features
– Expert: full display
– Advanced: full access to all parameters