MÁY HÀN MIG / MAG NEOPULSE 220 C XL Hãng: GYS – Pháp

The NEOPULSE 220 C XL is a single-phase pulsed MIG/MAG generator with digital technology. Designed for the highest
performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/
performance. Intuitive and highly functional, the digital interface allows for quick and easy modifications of the
welding parameters. Fitted with an accurate and powerful 4 drive roll feeding system, the NEOPULSE 220 C XL offers
manufacturers maximum productivity.

MULTI-PROCESS WELDING

MIG/MAG :
– steel and stainless steel wire: Ø 0.6 to 1.0 mm
– aluminium wire: Ø 0.8 to 1.2 mm
– CuSi and CuAl wire: Ø 0.8 to 1.0 mm
MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 5 mm).
TIG DC / Pulse.

SMART

SYNERGIC mode: After selecting 2 criteria (material/gas combination and the wire diameter),
NEOPULSE automatically works out the optimal welding conditions while still allowing you to
adjust the settings (wire feed rate, voltage, current, arc length).

ACCURATE

Calibration of the wire feed speed to adjust the displayed voltage measurement and refine the energy calculation.
Energie, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409.
Portability : load/backup user JOBS and machine configuration from a USB key.
Traceability : trace / record all welding steps, cord by cord, during industrial manufacturing in line with standard
EN ISO 3

OPTIMISED MIG/MAG SETTINGS

Welding processes: Manual, Standard, Pulsed, Arc Module (variation of hot / cold current)
TACK modes: SPOT and DELAY.
Trigger options supported: 2T and 4T.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.

MAXIMUM PRODUCTIVITY

4 microprocessors giving four times the processing power.
High productivity thanks to high duty cycle (150 A @ 60%).
Compatible wire reels: Ø 200 / 300 mm.
Powerful 4 roller wire-feeder for efficient wire feeding.
Very high arc voltage for easier ignition and exceptional arc dynamic.

INTUITIVE

– New user friendly interface focused on welders’ navigation habits.

– Update of the machine and synergies using a USB key.
– Storage of 500 welding programs (can be saved on USB stick).
– Displays current/voltage during and after welding (WPS/PQR).
– Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).
– Internal lighting of the wire feed motor and wire reel.
– Viewing window on wire door to check the state of wire.
– Intelligent ventilation management to reduce power consumption, dust intake and noise.
– Compatible torch Push Pull (24 V).

ROBUST AND MOBILE

Reinforced metal case & non slip rubber pads.
IP23S case.
2 handles for easier mobility.

3 levels of interface for the user:
– Easy: simplified features
– Expert: full display
– Advanced: full access to all parameters