MÁY HÀN TIG TITAN 400 DC Hãng: GYS – Pháp

The perfect solution for accurate welding of high alloy metals, the TITAN 400 power source with its high duty cycle
(400 A @ 60 %) is designed for the most demanding TIG and MMA welding applications. Its User friendly interface
enables easy setup with large and simple controls. Equipped with TACK mode and spot function, the TITAN 400 is the
preferred tool of the professional welder on pipework, tubular construction and stainless steel plate fabrications.

OPTIMISED DC WELDING

– TIG DC : welding in continuous current.
– TIG DC Pulse : reduces heat distortion of the workpiece.
– 3 special welding processes:
– SPOT mode: traditional spot welding before welding thin sheet metals.
– TACK mode: very precise spot welding function free of oxidation reducing the risk of heat
input causing deformation. The welding spots in TACK mode are invisible in the weld bead.
– E-TIG mode: ensures a unified weld bead width and consistant penetration regardless the
position of the torch in relation to the work piece (control of the welding energy).
2 types of Arc start-up: HF (without contact) or LIFT (with contact) for electro-sensitiveenvironments.
3 trigger modes: 2T, 4T and 4T LOG.
Automatic detection of the torch: compatible with trigger, double button and potentiometertorches.

MMA WELDING

– MMA: coated, rutile, basics and cellulosic electrodes (up to Ø 6 mm).
– MMA Pulse: Developed for vertical welding to reduce «sagging» and optimisepenetration

INTUITIVE

– Displays current/voltage during and after welding (WPS/PQR).
– JOB Save 50 programs for each process, for a perfect reproducibility of yourwelds.
– Remote control (optional pedal or manual).
– Lockable keyboard to protect against misuse.
– Intelligent cooling fan management system to minimise the power consumption
(stationary, off arc = 35 W), reduce dust absorption and noise.
«Connect 5» mode to trigger the machine from a automated controller orinterface (5 pre-saved program).

ACCURATE

– Calibration mode allows for the adjustment of the voltage and improvesthe calculation of the energy.
– ENERGY mode, display and calculation of energy after welding accordingto the standards EN1011-1, ISO/TR 18491 and QW-409.

STURDY

– IP 23 classification for outdoor use.

– Reinforced chassis & non-slip rubber pads.
– 2 steel handles for easy lifting or handling.
– 4 corner rings suitable for slinging the equipment.